Installation Manuals
Because Deck'Umbs are available in three styles, two of which are intended for decks and one which is intended for concrete patios, please select the installation manual specific to your Deck'Umbs product!
For Standard and Corner style Deck'Umbs products, please refer to our Standard Installation Guide.
For Concrete style Deck'Umbs products, please refer to our Concrete Installation Guide.
Once your Deck'Umbs have been installed, set-up and take-down are easy! Use the following steps:
Set-Up
- Insert Deck’Umbs holder and line up the pin with the slot openings on the Base.
- Rotate the holder clockwise until it stops and then rotate counter-clockwise to lock it in the base.
- Insert the umbrella pole into the holder and tighten the knob to secure the umbrella.
- Relax and enjoy!
- To remove the holder from the base, rotate the holder clockwise until it stops. Then lift and rotate it counter-clockwise at the same time to disengage the holder from the base.
- Insert the supplied plastic cap into the stainless steel ring to cover the hole.